Ce ISO Certified Alfalfa Biomass Briquette Mill of Animal Feed

Ce iso certified alfalfa biomass briquette mill of animal feed

  Biomass briquette mill, has separate discharge device, ensure the forming rate of pellets, is a new type of biomass alfalfa briquette mill that straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut shell, maize padding, cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.

  Alfalfa biomass briquette mill, widely applies in the industry and the civil boiler and smelting, fuel-burning equipment's environmental protection domain, the final pellet is widely used in heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coalboiler environmental pollution as well as the higher costs of industry fuel.

Features of alfalfa biomass briquette mill

1) Ce iso certified alfalfa biomass briquette mill of animal feed.

2) Vertical feeding, directly in place.

3) Die is static, rollers rotarying; materials are evenly distributed around, because of centrifugal force.

4) Doublelayer die. Two layers both can be used independently so the machine reduces the cost; What's more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly, high capacity and save energy.

5) Ring die and vertical structure are useful in cooling pelletizing room.

6) Independent and frequency conversion discharge device can ensure the rate of pellet formation.

7) The mold and the roller are made by the alloy steel, heat treatment processing are finished by ourselves, hardness is above 52, ensured both the pellet quality and the working life, working by the outside introversion extrusion force, with the centrifugal force combined, increased the capacity also ensured the hardness and density, by the special design of 4-8 rollers, to increase the frequency of extrusion, so the capacity also be increased.

How to make your own pellets with our biomass briquette mill

The complete biomass pellet making production line is composed the following steps.

Step1:Crushing

1) Before raw materials are made into biomass pellets of wood pellet machine,they are firstly reduced into smaller, uniform- sized particles. When the thickness is larger than 6 mm or size is greater than 50*50 mm, a wood pellet machine is needed to chip these materials into smaller pieces.

Step2:Drying

2) After all the raw material of wood pellet machine are crushed, dryer will be needed since for the most raw materials have the moisture content of about 50%.However, in general the optimal moisture content for pelletiztion is 13%-15%. Therefore, a rotary dryer is included in the wood pellet machine to reduce the moisture content.

Step3:Pelletizing

3) After crushing and drying all the raw materials properly, it is ready for the wood pellet machine. The wood pellet machine or press is the key piece of machine in the wood pellet plant. Wood pellet machine should be mentioned that impurities for the raw materials just like metal or stone, may damage the die and rollers of pellet machine.

Step4:Cooling

4) Usually after pelletizing, the temperature of wood pellet can reach almost60-80degrees, and also the moisture content is close to 15%. For storage purposes, a cooler must be used to reduce the surface temperature and moisture content.

Step5:Packing

5) Finally is the packing process of wood pellet making line. Inorder to protect the wood pellets from getting damaged and to increase storability, proper packing is necessary.